| Package | Description |
|---|---|
| com.bc.ceres.core |
Provides low-level application classes for service registration,
progress monitoring and assertions.
|
| org.esa.snap.core.dataio |
Contains the SNAP product I/O framework.
|
| org.esa.snap.core.dataio.dimap |
This module provides a product reader and writer plug-in for the BEAM-DIMAP product format.
|
| org.esa.snap.core.dataio.geometry | |
| org.esa.snap.core.dataio.placemark | |
| org.esa.snap.core.dataio.rgb | |
| org.esa.snap.core.datamodel |
Contains SNAP's central classes and interfaces used for an in-memory presentation
of remote sensing data products.
|
| org.esa.snap.core.datamodel.quicklooks | |
| org.esa.snap.core.dataop.barithm | |
| org.esa.snap.core.gpf |
SNAP's Graph Processing Framework GPF used for developing and executing
raster data operators and graphs of such operators.
|
| org.esa.snap.core.gpf.common | |
| org.esa.snap.core.gpf.descriptor.dependency | |
| org.esa.snap.core.gpf.graph | |
| org.esa.snap.core.gpf.pointop |
Provides special support for raster data operations that transforms each source pixel
into a corresponding target pixel at the same position.
|
| org.esa.snap.core.image |
Provides frequently used JAI
OpImage implementations and the
ImageManager utility class. |
| org.esa.snap.core.util |
Provides several utility classes used throughout SNAP.
|
| org.esa.snap.core.util.kmz | |
| org.esa.snap.core.util.math |
Provides utility classes for mathematical operations.
|
| Modifier and Type | Class and Description |
|---|---|
class |
NullProgressMonitor
A default progress monitor implementation suitable for subclassing.
|
class |
PrintWriterConciseProgressMonitor
A progress monitor which prints progress using a
PrintWriter. |
class |
PrintWriterProgressMonitor
A progress monitor which prints progress using a
PrintWriter. |
class |
ProgressMonitorWrapper
An abstract wrapper around a progress monitor which,
unless overridden, forwards
IProgressMonitor
and IProgressMonitorWithBlocking methods to the wrapped progress monitor. |
class |
SubProgressMonitor
A progress monitor that uses a given amount of work ticks
from a parent monitor.
|
| Modifier and Type | Field and Description |
|---|---|
static ProgressMonitor |
ProgressMonitor.NULL |
| Modifier and Type | Method and Description |
|---|---|
static ProgressMonitor |
SubProgressMonitor.create(ProgressMonitor monitor,
int ticks)
Creates a progress monitor based on the passed in parent monitor.
|
static ProgressMonitor |
SubProgressMonitor.createSynchronized(ProgressMonitor monitor,
int ticks)
Creates a progress monitor based on the passed in parent monitor.If the parent monitor is
NULL,
monitor is returned, otherwise a new SubProgressMonitor is created. |
ProgressMonitor |
ProcessObserver.getProgressMonitor() |
ProgressMonitor |
ProgressMonitorWrapper.getWrappedProgressMonitor()
Returns the wrapped progress monitor.
|
| Modifier and Type | Method and Description |
|---|---|
static ProgressMonitor |
SubProgressMonitor.create(ProgressMonitor monitor,
int ticks)
Creates a progress monitor based on the passed in parent monitor.
|
static ProgressMonitor |
SubProgressMonitor.createSynchronized(ProgressMonitor monitor,
int ticks)
Creates a progress monitor based on the passed in parent monitor.If the parent monitor is
NULL,
monitor is returned, otherwise a new SubProgressMonitor is created. |
void |
ProcessObserver.Handler.onObservationEnded(ProcessObserver.ObservedProcess process,
Integer exitCode,
ProgressMonitor pm)
Called if the process is no longer being observed.
|
void |
ProcessObserver.DefaultHandler.onObservationEnded(ProcessObserver.ObservedProcess process,
Integer exitCode,
ProgressMonitor pm) |
void |
ProcessObserver.Handler.onObservationStarted(ProcessObserver.ObservedProcess process,
ProgressMonitor pm)
Called if the process is started being observed.
|
void |
ProcessObserver.DefaultHandler.onObservationStarted(ProcessObserver.ObservedProcess process,
ProgressMonitor pm) |
void |
ProcessObserver.Handler.onStderrLineReceived(ProcessObserver.ObservedProcess process,
String line,
ProgressMonitor pm)
Called if a new text line that has been received from
stderr. |
void |
ProcessObserver.DefaultHandler.onStderrLineReceived(ProcessObserver.ObservedProcess process,
String line,
ProgressMonitor pm) |
void |
ProcessObserver.Handler.onStdoutLineReceived(ProcessObserver.ObservedProcess process,
String line,
ProgressMonitor pm)
Called if a new text line that has been received from
stdout. |
void |
ProcessObserver.DefaultHandler.onStdoutLineReceived(ProcessObserver.ObservedProcess process,
String line,
ProgressMonitor pm) |
ProcessObserver |
ProcessObserver.setProgressMonitor(ProgressMonitor progressMonitor)
Default does nothing.
|
| Constructor and Description |
|---|
ProgressMonitorWrapper(ProgressMonitor monitor)
Creates a new wrapper around the given monitor.
|
SubProgressMonitor(ProgressMonitor monitor,
int ticks)
Creates a new sub-progress monitor for the given monitor.
|
SubProgressMonitor(ProgressMonitor monitor,
int ticks,
int style)
Creates a new sub-progress monitor for the given monitor.
|
| Modifier and Type | Method and Description |
|---|---|
void |
AbstractProductReader.readBandRasterData(Band destBand,
int destOffsetX,
int destOffsetY,
int destWidth,
int destHeight,
ProductData destBuffer,
ProgressMonitor pm)
Reads raster data from the data source specified by the given destination band into the given in-memory buffer
and region.
|
void |
ProductFlipper.readBandRasterData(Band destBand,
int destOffsetX,
int destOffsetY,
int destWidth,
int destHeight,
ProductData destBuffer,
ProgressMonitor pm)
Reads raster data from the data source specified by the given destination band into the given in-memory buffer
and region.
|
void |
ProductReader.readBandRasterData(Band destBand,
int destOffsetX,
int destOffsetY,
int destWidth,
int destHeight,
ProductData destBuffer,
ProgressMonitor pm)
Reads raster data from the data source specified by the given destination band into the given in-memory buffer
and region.
|
protected abstract void |
AbstractProductReader.readBandRasterDataImpl(int sourceOffsetX,
int sourceOffsetY,
int sourceWidth,
int sourceHeight,
int sourceStepX,
int sourceStepY,
Band destBand,
int destOffsetX,
int destOffsetY,
int destWidth,
int destHeight,
ProductData destBuffer,
ProgressMonitor pm)
The template method which is called by the method after an optional spatial subset has been applied to the input
parameters.
|
protected void |
ProductFlipper.readBandRasterDataImpl(int sourceOffsetX,
int sourceOffsetY,
int sourceWidth,
int sourceHeight,
int sourceStepX,
int sourceStepY,
Band destBand,
int destOffsetX,
int destOffsetY,
int destWidth,
int destHeight,
ProductData destBuffer,
ProgressMonitor pm)
The template method which is called by the
readBandRasterDataSubSampling method after an optional
spatial subset has been applied to the input parameters. |
protected void |
ProductSubsetBuilder.readBandRasterDataImpl(int sourceOffsetX,
int sourceOffsetY,
int sourceWidth,
int sourceHeight,
int sourceStepX,
int sourceStepY,
Band destBand,
int destOffsetX,
int destOffsetY,
int destWidth,
int destHeight,
ProductData destBuffer,
ProgressMonitor pm)
The template method which is called by the
readBandRasterDataSubSampling method after an optional
spatial subset has been applied to the input parameters. |
default void |
ProductReader.readTiePointGridRasterData(TiePointGrid tpg,
int destOffsetX,
int destOffsetY,
int destWidth,
int destHeight,
ProductData destBuffer,
ProgressMonitor pm) |
void |
ProductWriter.writeBandRasterData(Band sourceBand,
int sourceOffsetX,
int sourceOffsetY,
int sourceWidth,
int sourceHeight,
ProductData sourceBuffer,
ProgressMonitor pm)
Writes raster data from the given in-memory source buffer into the data sink specified by the given source band
and region.
|
static void |
ProductIO.writeProduct(Product product,
File file,
String formatName,
boolean incremental,
ProgressMonitor pm)
Writes a product with the specified format to the given file.
|
static void |
ProductIO.writeProduct(Product product,
String filePath,
String formatName,
ProgressMonitor pm)
Writes a product with the specified format to the given file path.
|
| Modifier and Type | Method and Description |
|---|---|
protected void |
DimapProductReader.readBandRasterDataImpl(int sourceOffsetX,
int sourceOffsetY,
int sourceWidth,
int sourceHeight,
int sourceStepX,
int sourceStepY,
Band destBand,
int destOffsetX,
int destOffsetY,
int destWidth,
int destHeight,
ProductData destBuffer,
ProgressMonitor pm)
The template method which is called by the
AbstractProductReader.readBandRasterDataImpl(int, int, int, int, int, int, Band, int, int, int, int, ProductData, com.bc.ceres.core.ProgressMonitor) }
method after an optional spatial subset has been applied to the input parameters. |
void |
DimapProductReader.readTiePointGridRasterData(TiePointGrid tpg,
int destOffsetX,
int destOffsetY,
int destWidth,
int destHeight,
ProductData destBuffer,
ProgressMonitor pm) |
void |
DimapProductWriter.writeBandRasterData(Band sourceBand,
int sourceOffsetX,
int sourceOffsetY,
int sourceWidth,
int sourceHeight,
ProductData sourceBuffer,
ProgressMonitor pm)
Writes raster data from the given in-memory source buffer into the data sink specified by the given source band
and region.
|
| Modifier and Type | Method and Description |
|---|---|
static VectorDataNode |
VectorDataNodeReader.read(String sourceName,
Reader reader,
Product product,
FeatureUtils.FeatureCrsProvider crsProvider,
VectorDataNodeReader.PlacemarkDescriptorProvider placemarkDescriptorProvider,
org.opengis.referencing.crs.CoordinateReferenceSystem modelCrs,
char delimiterChar,
boolean convertToVertices,
ProgressMonitor pm)
Reads a
VectorDataNode from the given input. |
static VectorDataNode |
VectorDataNodeReader.read(String sourceName,
Reader reader,
Product product,
FeatureUtils.FeatureCrsProvider crsProvider,
VectorDataNodeReader.PlacemarkDescriptorProvider placemarkDescriptorProvider,
org.opengis.referencing.crs.CoordinateReferenceSystem modelCrs,
char delimiterChar,
ProgressMonitor pm)
Reads a
VectorDataNode from the given input. |
| Modifier and Type | Method and Description |
|---|---|
static void |
PlacemarkIO.writePlacemarkKmzFile(OutputStream os,
List<PlacemarkData> placemarks,
ProgressMonitor pm) |
| Modifier and Type | Method and Description |
|---|---|
protected void |
ImageProductReader.readBandRasterDataImpl(int sourceOffsetX,
int sourceOffsetY,
int sourceWidth,
int sourceHeight,
int sourceStepX,
int sourceStepY,
Band destBand,
int destOffsetX,
int destOffsetY,
int destWidth,
int destHeight,
ProductData destBuffer,
ProgressMonitor pm) |
| Modifier and Type | Method and Description |
|---|---|
static void |
DensityPlot.accumulate(RasterDataNode raster1,
double sampleMin1,
double sampleMax1,
RasterDataNode raster2,
double sampleMin2,
double sampleMax2,
Mask roiMask,
int width,
int height,
byte[] pixelValues,
ProgressMonitor pm)
Creates the data for a density plot image from two raster data nodes.
|
static void |
StxFactory.accumulate(RasterDataNode rasterDataNode,
int level,
RenderedImage roiImage,
Shape roiShape,
org.esa.snap.core.datamodel.StxOp op,
ProgressMonitor pm) |
protected Stx |
Band.computeStxImpl(int level,
ProgressMonitor pm) |
protected Stx |
RasterDataNode.computeStxImpl(int level,
ProgressMonitor pm)
Computes the statistics.
|
Stx |
StxFactory.create(Mask[] roiMasks,
RasterDataNode[] rasters,
ProgressMonitor pm)
Computes statistics for the given set of raster data nodes.
|
Stx |
StxFactory.create(RasterDataNode raster,
ProgressMonitor pm)
Computes statistics for the given raster data node.
|
BufferedImage |
RasterDataNode.createColorIndexedImage(ProgressMonitor pm)
Creates an image for this raster data node.
|
ImageInfo |
Band.createDefaultImageInfo(double[] histoSkipAreas,
ProgressMonitor pm) |
ImageInfo |
RasterDataNode.createDefaultImageInfo(double[] histoSkipAreas,
ProgressMonitor pm)
Creates a default image information instance.
|
static BasicPixelGeoCoding |
GeoCodingFactory.createPixelGeoCoding(Band latBand,
Band lonBand,
String validMask,
int searchRadius,
ProgressMonitor pm)
Deprecated.
since SNAP 8, use
ComponentGeoCoding instead |
BufferedImage |
RasterDataNode.createRgbImage(ProgressMonitor pm)
Creates an RGB image for this raster data node.
|
ImageInfo |
RasterDataNode.getImageInfo(double[] histoSkipAreas,
ProgressMonitor pm)
Gets the image creation information.
|
ImageInfo |
RasterDataNode.getImageInfo(ProgressMonitor pm)
Returns the image information for this raster data node.
|
double[] |
TiePointGrid.getPixels(int x,
int y,
int w,
int h,
double[] pixels,
ProgressMonitor pm)
Retrieves an array of tie point data interpolated to the product width and height as float array.
|
abstract double[] |
RasterDataNode.getPixels(int x,
int y,
int w,
int h,
double[] pixels,
ProgressMonitor pm)
Retrieves the range of pixels specified by the coordinates as double array.
|
double[] |
AbstractBand.getPixels(int x,
int y,
int w,
int h,
double[] pixels,
ProgressMonitor pm)
Retrieves the range of pixels specified by the coordinates as double array.
|
float[] |
TiePointGrid.getPixels(int x,
int y,
int w,
int h,
float[] pixels,
ProgressMonitor pm)
Retrieves an array of tie point data interpolated to the product with and height as double array.
|
abstract float[] |
RasterDataNode.getPixels(int x,
int y,
int w,
int h,
float[] pixels,
ProgressMonitor pm)
Retrieves the range of pixels specified by the coordinates as float array.
|
float[] |
AbstractBand.getPixels(int x,
int y,
int w,
int h,
float[] pixels,
ProgressMonitor pm)
Retrieves the range of pixels specified by the coordinates as float array.
|
int[] |
TiePointGrid.getPixels(int x,
int y,
int w,
int h,
int[] pixels,
ProgressMonitor pm)
Retrieves an array of tie point data interpolated to the product with and height as integer array.
|
abstract int[] |
RasterDataNode.getPixels(int x,
int y,
int w,
int h,
int[] pixels,
ProgressMonitor pm)
Retrieves the range of pixels specified by the coordinates as integer array.
|
int[] |
AbstractBand.getPixels(int x,
int y,
int w,
int h,
int[] pixels,
ProgressMonitor pm)
Retrieves the range of pixels specified by the coordinates as integer array.
|
Stx |
RasterDataNode.getStx(boolean accurate,
ProgressMonitor pm)
Gets the statistics.
|
void |
RasterDataNode.loadRasterData(ProgressMonitor pm)
Loads the raster data for this
RasterDataNode. |
void |
AbstractBand.loadRasterData(ProgressMonitor pm)
Loads the complete underlying raster data.
|
void |
RasterDataNode.processRasterData(String message,
RasterDataNode.RasterDataProcessor processor,
ProgressMonitor pm)
Processes the raster's data.
|
void |
RasterDataNode.RasterDataProcessor.processRasterDataBuffer(ProductData buffer,
int y0,
int numLines,
ProgressMonitor pm)
Processes some input raster lines.
|
void |
RasterDataNode.quantizeRasterData(double newMin,
double newMax,
double gamma,
byte[] samples,
int offset,
int stride,
ProgressMonitor pm) |
byte[] |
RasterDataNode.quantizeRasterData(double newMin,
double newMax,
double gamma,
ProgressMonitor pm) |
double[] |
TiePointGrid.readPixels(int x,
int y,
int w,
int h,
double[] pixels,
ProgressMonitor pm)
Retrieves an array of tie point data interpolated to the product with and height as double array.
|
abstract double[] |
RasterDataNode.readPixels(int x,
int y,
int w,
int h,
double[] pixels,
ProgressMonitor pm)
Retrieves the band data at the given offset (x, y), width and height as int data.
|
double[] |
AbstractBand.readPixels(int x,
int y,
int w,
int h,
double[] pixels,
ProgressMonitor pm)
Retrieves the band data at the given offset (x, y), width and height as double data.
|
float[] |
TiePointGrid.readPixels(int x,
int y,
int w,
int h,
float[] pixels,
ProgressMonitor pm)
Retrieves an array of tie point data interpolated to the product with and height as float array.
|
abstract float[] |
RasterDataNode.readPixels(int x,
int y,
int w,
int h,
float[] pixels,
ProgressMonitor pm)
Retrieves the band data at the given offset (x, y), width and height as int data.
|
float[] |
AbstractBand.readPixels(int x,
int y,
int w,
int h,
float[] pixels,
ProgressMonitor pm)
Retrieves the band data at the given offset (x, y), width and height as float data.
|
int[] |
TiePointGrid.readPixels(int x,
int y,
int w,
int h,
int[] pixels,
ProgressMonitor pm)
Retrieves an array of tie point data interpolated to the product with and height as float array.
|
abstract int[] |
RasterDataNode.readPixels(int x,
int y,
int w,
int h,
int[] pixels,
ProgressMonitor pm)
Retrieves the band data at the given offset (x, y), width and height as int data.
|
int[] |
AbstractBand.readPixels(int x,
int y,
int w,
int h,
int[] pixels,
ProgressMonitor pm)
Retrieves the band data at the given offset (x, y), width and height as integer data.
|
void |
TiePointGrid.readRasterData(int offsetX,
int offsetY,
int width,
int height,
ProductData rasterData,
ProgressMonitor pm)
Reads raster data from this dataset into the user-supplied raster data buffer.
|
void |
Band.readRasterData(int offsetX,
int offsetY,
int width,
int height,
ProductData rasterData,
ProgressMonitor pm)
Reads raster data from its associated data source into the given data buffer.
|
abstract void |
RasterDataNode.readRasterData(int offsetX,
int offsetY,
int width,
int height,
ProductData rasterData,
ProgressMonitor pm)
The method behaves exactly as
RasterDataNode.readRasterData(int, int, int, int, ProductData),
but clients can additionally pass a ProgressMonitor. |
void |
TiePointGrid.readRasterDataFully(ProgressMonitor pm)
Reads the complete underlying raster data.
|
void |
Band.readRasterDataFully(ProgressMonitor pm)
Reads the complete underlying raster data.
|
abstract void |
RasterDataNode.readRasterDataFully(ProgressMonitor pm)
Reads the complete underlying raster data.
|
void |
TiePointGrid.writePixels(int x,
int y,
int w,
int h,
double[] pixels,
ProgressMonitor pm)
This method is not implemented because pixels are read-only in tie-point grids.
|
abstract void |
RasterDataNode.writePixels(int x,
int y,
int w,
int h,
double[] pixels,
ProgressMonitor pm)
Writes the range of given pixels specified to the specified coordinates as doubles.
|
void |
AbstractBand.writePixels(int x,
int y,
int w,
int h,
double[] pixels,
ProgressMonitor pm)
Retrieves the range of pixels specified by the coordinates as double array.
|
void |
VirtualBand.writePixels(int x,
int y,
int w,
int h,
double[] pixels,
ProgressMonitor pm)
Retrieves the range of pixels specified by the coordinates as double array.
|
void |
TiePointGrid.writePixels(int x,
int y,
int w,
int h,
float[] pixels,
ProgressMonitor pm)
This method is not implemented because pixels are read-only in tie-point grids.
|
abstract void |
RasterDataNode.writePixels(int x,
int y,
int w,
int h,
float[] pixels,
ProgressMonitor pm)
Writes the range of given pixels specified to the specified coordinates as floats.
|
void |
AbstractBand.writePixels(int x,
int y,
int w,
int h,
float[] pixels,
ProgressMonitor pm)
Retrieves the range of pixels specified by the coordinates as float array.
|
void |
VirtualBand.writePixels(int x,
int y,
int w,
int h,
float[] pixels,
ProgressMonitor pm)
Retrieves the range of pixels specified by the coordinates as float array.
|
void |
TiePointGrid.writePixels(int x,
int y,
int w,
int h,
int[] pixels,
ProgressMonitor pm)
This method is not implemented because pixels are read-only in tie-point grids.
|
abstract void |
RasterDataNode.writePixels(int x,
int y,
int w,
int h,
int[] pixels,
ProgressMonitor pm)
Writes the range of given pixels specified to the specified coordinates as integers.
|
void |
AbstractBand.writePixels(int x,
int y,
int w,
int h,
int[] pixels,
ProgressMonitor pm)
Retrieves the range of pixels specified by the coordinates as integer array.
|
void |
VirtualBand.writePixels(int x,
int y,
int w,
int h,
int[] pixels,
ProgressMonitor pm)
Retrieves the range of pixels specified by the coordinates as integer array.
|
void |
TiePointGrid.writeRasterData(int offsetX,
int offsetY,
int width,
int height,
ProductData rasterData,
ProgressMonitor pm)
Writes data from this product raster into the specified region of the user-supplied raster.
|
void |
FilterBand.writeRasterData(int offsetX,
int offsetY,
int width,
int height,
ProductData rasterData,
ProgressMonitor pm)
Writes data from this product raster into the specified region of the user-supplied raster.
|
void |
Band.writeRasterData(int offsetX,
int offsetY,
int width,
int height,
ProductData rasterData,
ProgressMonitor pm)
Writes data from this product raster into the specified region of the user-supplied raster.
|
abstract void |
RasterDataNode.writeRasterData(int offsetX,
int offsetY,
int width,
int height,
ProductData rasterData,
ProgressMonitor pm)
Writes data from this product raster into the specified region of the user-supplied raster.
|
void |
TiePointGrid.writeRasterDataFully(ProgressMonitor pm)
Writes the complete underlying raster data.
|
void |
Band.writeRasterDataFully(ProgressMonitor pm)
Writes the complete underlying raster data.
|
abstract void |
RasterDataNode.writeRasterDataFully(ProgressMonitor pm)
Writes the complete underlying raster data.
|
| Constructor and Description |
|---|
PixelGeoCoding(Band latBand,
Band lonBand,
String validMask,
int searchRadius,
ProgressMonitor pm)
Deprecated.
Constructs a new pixel-based geo-coding.
|
| Modifier and Type | Method and Description |
|---|---|
BufferedImage |
QuicklookGenerator.createQuickLookImage(Product product,
Band[] quicklookBands,
ProgressMonitor pm) |
BufferedImage |
Thumbnail.getImage(ProgressMonitor pm) |
BufferedImage |
Quicklook.getImage(ProgressMonitor pm) |
| Constructor and Description |
|---|
RasterDataLoop(int offsetX,
int offsetY,
int regionWidth,
int regionHeight,
Term[] terms,
ProgressMonitor pm)
Creates an instance of this class for the given region and terms.
|
RasterDataLoop(RasterDataEvalEnv rasterDataEvalEnv,
Term[] terms,
ProgressMonitor pm)
Creates an instance of this class for the given region and terms.
|
| Modifier and Type | Method and Description |
|---|---|
void |
Operator.computeTile(Band targetBand,
Tile targetTile,
ProgressMonitor pm)
Called by the framework in order to compute a tile for the given target band.
|
void |
Operator.computeTileStack(Map<Band,Tile> targetTiles,
Rectangle targetRectangle,
ProgressMonitor pm)
Called by the framework in order to compute the stack of tiles for the given target bands.
|
void |
Operator.doExecute(ProgressMonitor pm)
Executes the operator.
|
void |
Operator.execute(ProgressMonitor pm)
Executes the operator.
|
static void |
GPF.writeProduct(Product product,
File file,
String formatName,
boolean clearCacheAfterRowWrite,
boolean incremental,
ProgressMonitor pm)
Writes a product with the specified format to the given file.
|
static void |
GPF.writeProduct(Product product,
File file,
String formatName,
boolean incremental,
ProgressMonitor pm)
Writes a product with the specified format to the given file.
|
| Modifier and Type | Method and Description |
|---|---|
void |
JaiOp.computeTile(Band targetBand,
Tile targetTile,
ProgressMonitor pm) |
void |
ReadOp.computeTile(Band band,
Tile targetTile,
ProgressMonitor pm) |
void |
MergeOp.computeTile(Band band,
Tile targetTile,
ProgressMonitor pm) |
void |
BandMathsOp.computeTile(Band band,
Tile targetTile,
ProgressMonitor pm) |
void |
WriteOp.computeTile(Band targetBand,
Tile targetTile,
ProgressMonitor pm) |
void |
SubsetOp.computeTile(Band band,
Tile targetTile,
ProgressMonitor pm) |
void |
WriteRGBOp.computeTile(Band band,
Tile targetTile,
ProgressMonitor pm) |
void |
WriteOp.computeTileStack(Map<Band,Tile> targetTiles,
Rectangle targetRectangle,
ProgressMonitor pm) |
void |
WriteOp.doExecute(ProgressMonitor pm) |
void |
WriteRGBOp.doExecute(ProgressMonitor pm) |
void |
WriteOp.writeProduct(ProgressMonitor pm)
Writes the source product.
|
| Modifier and Type | Method and Description |
|---|---|
void |
BundleInstaller.setProgressMonitor(ProgressMonitor monitor)
Sets a progress monitor for this installer.
|
| Modifier and Type | Method and Description |
|---|---|
Product[] |
GraphProcessor.executeGraph(GraphContext graphContext,
ProgressMonitor pm)
Executes the graph given by
GraphContext. |
void |
GraphProcessor.executeGraph(Graph graph,
ProgressMonitor pm)
Executes the graph using a new default
GraphContext. |
| Modifier and Type | Method and Description |
|---|---|
void |
SampleOperator.computeTile(Band targetBand,
Tile targetTile,
ProgressMonitor pm)
Overridden to call the
computeSample method for every
pixel in the given tile's rectangle. |
void |
PixelOperator.computeTileStack(Map<Band,Tile> targetTileStack,
Rectangle targetRectangle,
ProgressMonitor pm) |
| Modifier and Type | Method and Description |
|---|---|
static ColoredBandImageMultiLevelSource |
ColoredBandImageMultiLevelSource.create(RasterDataNode[] rasterDataNodes,
MultiLevelModel model,
ProgressMonitor pm) |
static ColoredBandImageMultiLevelSource |
ColoredBandImageMultiLevelSource.create(RasterDataNode[] rasterDataNodes,
ProgressMonitor pm) |
static ColoredBandImageMultiLevelSource |
ColoredBandImageMultiLevelSource.create(RasterDataNode rasterDataNode,
ProgressMonitor pm) |
void |
ImageManager.prepareImageInfos(RasterDataNode[] rasterDataNodes,
ProgressMonitor pm) |
| Modifier and Type | Method and Description |
|---|---|
static org.geotools.feature.DefaultFeatureCollection |
FeatureUtils.clipCollection(org.geotools.feature.FeatureCollection<org.opengis.feature.simple.SimpleFeatureType,org.opengis.feature.simple.SimpleFeature> sourceCollection,
org.opengis.referencing.crs.CoordinateReferenceSystem defaultSourceCrs,
org.locationtech.jts.geom.Geometry clipGeometry,
org.opengis.referencing.crs.CoordinateReferenceSystem clipCrs,
String targetID,
org.opengis.referencing.crs.CoordinateReferenceSystem targetCrs,
ProgressMonitor pm)
Clips the given
sourceCollection against the clipGeometry and reprojects the clipped features
to the targetCrs. |
static org.geotools.feature.DefaultFeatureCollection |
FeatureUtils.clipFeatureCollectionToProductBounds(org.geotools.feature.FeatureCollection<org.opengis.feature.simple.SimpleFeatureType,org.opengis.feature.simple.SimpleFeature> featureCollection,
Product product,
FeatureUtils.FeatureCrsProvider crsProvider,
ProgressMonitor pm) |
static BufferedImage |
ProductUtils.createColorIndexedImage(RasterDataNode rasterDataNode,
ProgressMonitor pm)
Creates a greyscale image from the given
{@link RasterDataNode}. |
static BufferedImage |
ProductUtils.createDensityPlotImage(RasterDataNode raster1,
float sampleMin1,
float sampleMax1,
RasterDataNode raster2,
float sampleMin2,
float sampleMax2,
Mask roiMask,
int width,
int height,
Color background,
BufferedImage image,
ProgressMonitor pm)
Creates a density plot image from two raster data nodes.
|
static ImageInfo |
ProductUtils.createImageInfo(RasterDataNode[] rasters,
boolean assignMissingImageInfos,
ProgressMonitor pm)
Creates image creation information.
|
static BufferedImage |
ProductUtils.createRgbImage(RasterDataNode[] rasters,
ImageInfo imageInfo,
ProgressMonitor pm)
Creates a RGB image from the given array of
{@link RasterDataNode}s. |
void |
ResourceInstaller.install(String patternString,
ProgressMonitor pm)
Installs all resources found, matching the given pattern.
|
static org.geotools.feature.DefaultFeatureCollection |
FeatureUtils.loadShapefileForProduct(File file,
Product product,
FeatureUtils.FeatureCrsProvider crsProvider,
ProgressMonitor pm) |
static BufferedImage |
ProductUtils.overlayMasks(RasterDataNode raster,
BufferedImage overlayBIm,
ProgressMonitor pm)
Draws all the masks contained overlay mask group of the given raster to the ovelayBIm image.
|
| Modifier and Type | Method and Description |
|---|---|
void |
KmzExporter.export(KmlFeature kmlFeature,
ZipOutputStream zipOutputStream,
ProgressMonitor pm) |
| Modifier and Type | Method and Description |
|---|---|
void |
Histogram.aggregate(Object values,
boolean unsigned,
IndexValidator validator,
ProgressMonitor pm) |
void |
Range.aggregate(Object values,
boolean unsigned,
IndexValidator validator,
ProgressMonitor pm) |
static Histogram |
Histogram.computeHistogramByte(byte[] values,
IndexValidator validator,
int numBins,
Range range,
Histogram histo,
ProgressMonitor pm)
Computes the histogram for the values in the given
byte array in the given value range. |
static Histogram |
Histogram.computeHistogramDouble(double[] values,
IndexValidator validator,
int numBins,
Range range,
Histogram histogram,
ProgressMonitor pm)
Computes the histogram for the values in the given
double array in the given value range. |
static Histogram |
Histogram.computeHistogramDouble(DoubleList values,
IndexValidator validator,
int numBins,
Range range,
Histogram histo,
ProgressMonitor pm)
Computes the histogram for the values in the given
Histogram.DoubleList in the given value range. |
static Histogram |
Histogram.computeHistogramFloat(float[] values,
IndexValidator validator,
int numBins,
Range range,
Histogram histogram,
ProgressMonitor pm)
Computes the histogram for the values in the given
float array in the given value range. |
static Histogram |
Histogram.computeHistogramGeneric(Object values,
boolean unsigned,
IndexValidator validator,
int numBins,
Range range,
Histogram histogram,
ProgressMonitor pm)
Computes the histogram for the values in the given
Histogram.DoubleList in the given value range. |
static Histogram |
Histogram.computeHistogramInt(int[] values,
IndexValidator validator,
int numBins,
Range range,
Histogram histogram,
ProgressMonitor pm)
Computes the histogram for the values in the given
int array in the given value range. |
static Histogram |
Histogram.computeHistogramShort(short[] values,
IndexValidator validator,
int numBins,
Range range,
Histogram histo,
ProgressMonitor pm)
Computes the histogram for the values in the given
short array in the given value range. |
static Histogram |
Histogram.computeHistogramUByte(byte[] values,
IndexValidator validator,
int numBins,
Range range,
Histogram histo,
ProgressMonitor pm)
Computes the histogram for the values in the given
byte array in the given value range. |
static Histogram |
Histogram.computeHistogramUInt(int[] values,
IndexValidator validator,
int numBins,
Range range,
Histogram histogram,
ProgressMonitor pm)
Computes the histogram for the values in the given
int array in the given value range. |
static Histogram |
Histogram.computeHistogramUShort(short[] values,
IndexValidator validator,
int numBins,
Range range,
Histogram histo,
ProgressMonitor pm)
Computes the histogram for the values in the given
short array in the given value range. |
static Range |
Range.computeRangeByte(byte[] values,
IndexValidator validator,
Range range,
ProgressMonitor pm)
Computes the value range for the values in the given
byte array. |
static Range |
Range.computeRangeDouble(double[] values,
IndexValidator validator,
Range range,
ProgressMonitor pm)
Computes the value range for the values in the given
double array. |
static Range |
Range.computeRangeDouble(DoubleList values,
IndexValidator validator,
Range range,
ProgressMonitor pm)
Computes the value range for the values in the given
Range.DoubleList. |
static Range |
Range.computeRangeFloat(float[] values,
IndexValidator validator,
Range range,
ProgressMonitor pm)
Computes the value range for the values in the given
float array. |
static Range |
Range.computeRangeGeneric(Object values,
boolean unsigned,
IndexValidator validator,
Range range,
ProgressMonitor pm)
Computes the value range for the values in the given
Object. |
static Range |
Range.computeRangeInt(int[] values,
IndexValidator validator,
Range range,
ProgressMonitor pm)
Computes the value range for the values in the given
int array. |
static Range |
Range.computeRangeShort(short[] values,
IndexValidator validator,
Range range,
ProgressMonitor pm)
Computes the value range for the values in the given
short array. |
static Range |
Range.computeRangeUByte(byte[] values,
IndexValidator validator,
Range range,
ProgressMonitor pm)
Computes the value range for the values in the given
byte array. |
static Range |
Range.computeRangeUInt(int[] values,
IndexValidator validator,
Range range,
ProgressMonitor pm)
Computes the value range for the values in the given
int array. |
static Range |
Range.computeRangeUShort(short[] values,
IndexValidator validator,
Range range,
ProgressMonitor pm)
Computes the value range for the values in the given
short array. |
static void |
Quantizer.quantizeByte(byte[] srcValues,
int srcMin,
int srcMax,
byte[] dstValues,
int dstPos,
int dstStride,
ProgressMonitor pm) |
static void |
Quantizer.quantizeDouble(double[] srcValues,
double srcMin,
double srcMax,
byte[] dstValues,
int dstPos,
int dstStride,
ProgressMonitor pm) |
static void |
Quantizer.quantizeDouble(DoubleList srcValues,
double srcMin,
double srcMax,
byte[] dstValues,
int dstPos,
int dstStride,
ProgressMonitor pm) |
static void |
Quantizer.quantizeFloat(float[] srcValues,
float srcMin,
float srcMax,
byte[] dstValues,
int dstPos,
int dstStride,
ProgressMonitor pm) |
static void |
Quantizer.quantizeGeneric(Object srcValues,
boolean srcUnsigned,
double srcMin,
double srcMax,
byte[] dstValues,
int dstPos,
int dstStride,
ProgressMonitor pm) |
static void |
Quantizer.quantizeInt(int[] srcValues,
int srcMin,
int srcMax,
byte[] dstValues,
int dstPos,
int dstStride,
ProgressMonitor pm) |
static void |
Quantizer.quantizeShort(short[] srcValues,
int srcMin,
int srcMax,
byte[] dstValues,
int dstPos,
int dstStride,
ProgressMonitor pm) |
static void |
Quantizer.quantizeUByte(byte[] srcValues,
int srcMin,
int srcMax,
byte[] dstValues,
int dstPos,
int dstStride,
ProgressMonitor pm) |
static void |
Quantizer.quantizeUInt(int[] srcValues,
long srcMin,
long srcMax,
byte[] dstValues,
int dstPos,
int dstStride,
ProgressMonitor pm) |
static void |
Quantizer.quantizeUShort(short[] srcValues,
int srcMin,
int srcMax,
byte[] dstValues,
int dstPos,
int dstStride,
ProgressMonitor pm) |
Copyright © 2014–2022 European Space Agency (ESA). All rights reserved.